Lost your Occupational First Aid ticket?
Losing your ticket at any time is stressful for everyone that needs it to work as an attendant in the workplace. To help make the stress of getting a new ticket as best as possible we have put some steps together to smooth-en the process.
If you have lost your Occupational First Aid Level 1, 2 or 3 ticket, please read the following.
Requirements for replacement
1. Have taken the course with Be Prepared on-site or off-site
2. Have successfully completed the course and were in possession of a valid ticket
3. Ticket is still valid at the time of request
Next steps
Send us an email stating the reason for your request to replace your ticket (like lost or stolen). Please include if it was an OFA L1, 2 or 3 ticket. The best email address to use is bep@be-prepared.ca and will be responded to by end of day.
Make sure we have your full name, date of birth and email address including mailing address. If approximate date of course is known, please add that to your information. Include a picture of passport or drivers license for ID verification.
After receiving all the information, we will verify you are known in our system, still a current ticket holder and issue you a new ticket.
Costs for lost your occupational first aid ticket?
Because of all the required steps and retrieving old information and adding new information to the file, the administration fee for receiving the new ticket is $40.
After receiving the administration fee we will either mail out the ticket to you or have it ready for pick up at our location (please call ahead before dropping in).
On request we can send you a copy of your new ticket via text or email, prior to sending out or pick-up.
Please select at checkout, what you would like to do with your ticket, pick-up at the school (call or text 778-987-5228 prior to coming), regular mail (might not get to you, so would costs you the same amount again) or registered mail.
You can start the process by filling out our contact form.
WHMIS 2015 (GHS) Online
WHMIS 2015 Online is based on the current 2015 legislation and meets the legislated requirement for general WHMIS training. Employers must also provide workplace-specific training and instruction for each of the hazardous products in the workplace.
WHMIS 2015 has come into effect with a transition period that lasts several years (full implementation by December 1, 2018). During this time, suppliers must fully comply with either WHMIS 2015 or with the “old” WHMIS (WHMIS 1988). This means that there may be hazardous products in the workplace that use WHMIS 2015 labels, classifications and Safety Data Sheets and there may be hazardous products that use WHMIS 1988 labels, classifications and (Material) Safety Data Sheets.
Duration
WHMIS Online is self-paced. Participants may leave the course at any time and can resume where they left off. The time required to complete the course will depend on many factors including the participant’s learning style and their prior knowledge of course material. Most participants will complete WHMIS Online in less than 2 hours.
Learning Objectives:
Upon completion of WHMIS 2015 (GHS) online, participants will be able to:
- Understand the essential role WHMIS plays in protecting the health and safety of Canadian workers
- Identify the WHMIS responsibilities of suppliers, employers, and workers
- Know the workplace requirements related to the use of supplier labels and workplace labels, and how to locate and interpret the information found on these labels
- Recognize the WHMIS pictograms and the types of hazard each represents
- Recognize the Safety Data Sheet (SDS) as a source of comprehensive information about a hazardous chemical in the workplace and know how to locate various types of information when reading an SDS
- Identify the WHMIS exemptions for suppliers and importers
- Know general safe work practices that should be followed when working with hazardous products
WHMIS Online is an active learning experience, using interactive content screens and online exercises to engage learners and reinforce key concepts. Mandatory testing ensures that participants have met learning objectives and retained the required knowledge.
Evaluation Process:
No participant can complete the course without verifying their understanding of the course material. WHMIS 2015 (GHS) online is presented in 6 modules. To progress from one module to the next, participants must pass a mandatory test. Those who do not pass the test must review the module content and re-test. There is no limit to the number of re-tests. Test questions are randomly selected from a test bank to ensure that re-tests will be unique.
How to register?
Please select how many you would like to purchase and pay for the course by adding to your cart. Once payment is received you will receive an email within 24hrs from the Red Cross with your login code(s). Please makes sure we receive email addresses for everyone enrolled into the program with first and last name. This will ensure everyone is getting login codes.
When successfully completed you will receive an electronic certificate of completion.
Transportation of Dangerous Goods (TDG)
In the Transportation of Dangerous Goods (TDG) course you will learn its regulations and proper training, proper documentation, safety marks and means of containment, forbidden goods, exemptions and special provisions as well as, immediate reporting and procedures to follow in the event of an emergency.
Also Please Note: Although this is a nationally recognized course, if you are currently unemployed and seeking employment it is up to your new employer to accept any prior training. They may still require you to re-train once hired.
Duration
This online course is self-paced. Participants may leave the course at anytime and can resume where they left off. The duration will depend on the individual participant and their prior knowledge of the subject matter. On average, the course will take between 5 – 9 hours to complete.
Learning Objectives:
Ultimately, the goal of this course is to provide participants with the information they need to comply with the TDG Act and regulations. By completing this course, they should know how dangerous goods are classified; understand the regulations pertaining to proper documentation, safety marks, means of containment, forbidden goods, exemptions and special provisions; and know the immediate reporting and procedures to follow in the event of an emergency involving dangerous goods.
This course is presented in 9 modules:
- Introduction to TDG
- Regulations and Training
- Classification of Dangerous Goods
- Safety Marks Used in Conjunction with Dangerous Goods
- Means of Containment
- Documentation
- Forbidden Goods, Exemptions and Special Provisions
- Exemptions
- Immediate Reporting and ERAPs
Evaluation Process:
At the end of each module, there is a test. Participants that do not achieve 100% can review the module content and try as many times as necessary to complete the course. Test questions are randomly selected from a test bank, making each test unique.
How to register?
Please select how many you would like to purchase and pay for the course by adding to your cart. Once payment is received you will receive an email within 24hrs from the Red Cross with your login code(s). Please makes sure we receive email addresses for everyone enrolled into the program with first and last name. This will ensure everyone is getting login codes.
When successfully completed you will receive an electronic certificate of completion.
Medical Terminology
The Medical Terminology course provides an introduction to the professional language used by those who are directly and indirectly involved with the art of healing. The course will also introduce those not currently involved in the health care environment with an introduction to the language of medicine. In addition, the program will provide participants with the basics of human anatomy and physiology.
Duration
This online course is self-paced. Participants may leave the course at anytime and can resume where they left off. The duration will depend on the individual participant and their prior knowledge of the subject matter. On average, the course will take between 12 – 24 hours to complete.
Course Content
- Introduction to Medical Terminology
- Body Structures
- Word Parts
- Integumentary System
- The Breast
- Musculoskeletal System
- Nervous System
- The Sensory System
- Cardiovascular System
- Lymphatic and Immune System
- Respiratory System
- Digestive System
- The Endocrine System
- Reproductive System
- Urinary System
Evaluation Process:
At the end of each module, there is a test. Participants that do not achieve 70% can review the module content and try as many times as necessary to complete the course. Test questions are randomly selected from a test bank, making each test unique.
How to register?
Please select how many you would like to purchase and pay for the course by adding to your cart. Once payment is received you will receive an email within 24hrs from the Red Cross with your login code(s). Please makes sure we receive email addresses for everyone enrolled into the program with first and last name. This will ensure everyone is getting login codes.
When successfully completed you will receive an electronic certificate of completion.
Lockout / Tagout
The term “Lockout/Tagout” refers to specific practices and procedures to safeguard workers from the unexpected energizing or start-up of machinery and equipment, or the release of hazardous energy during service or maintenance activities. Lockout/Tagout explains the importance of Lockout/Tagout in protecting the health and safety of workers. The course examines basic workplace safety tenets and examines the specific stages and procedures of the Lockout/Tagout process. The basic tenets of safety are explained as are the specific stages and procedures of the Lockout-Tagout process.
Duration
This online course is self-paced. Participants may leave the course at anytime and can resume where they left off. The duration will depend on the individual participant and their prior knowledge of the subject matter. On average, the course will take between 1.5 – 3 hours to complete.
Learning Objectives:
Ultimately, the goal of this course is to educate participants as to what a lockout device is and when Lockout-Tagout should be used in the work place. The course examines basic workplace safety tenets and examines the specific stages and procedures of the Lockout-Tagout process.
This course is presented in 4 modules:
- Introduction
- Injury Prevention
- Equipment Shutdown and Isolation
- The Procedure of Lockout – Tagout
Evaluation Process:
At the end of each module, there is a test. Participants that do not achieve 100% can review the module content and try as many times as necessary to complete the course. Test questions are randomly selected from a test bank, making each test unique.
How to register?
Please select how many you would like to purchase and pay for the course by adding to your cart. Once payment is received you will receive an email within 24hrs from the Red Cross with your login code(s). Please makes sure we receive email addresses for everyone enrolled into the program with first and last name. This will ensure everyone is getting login codes.
When successfully completed you will receive an electronic certificate of completion.
Fire Safety
No one expects a fire, emergency or other disaster to occur in their workplace. It is important to remember that these misfortunes can strike anyone, anytime, and in any workplace. Fires in the workplace cause extensive injury and property loss. If a fire started in your home or workplace would you know what to do?
Fire Safety teaches participants about the legislated fire safety responsibilities of the employer and the worker, describes safe work practices related to fire prevention, and provides practical information about emergency response in situations involving fire.
Course Duration:
This online course is self-paced. Participants may leave the course at anytime and can resume where they left off. The duration will depend on the individual participant and their prior knowledge of the subject matter. On average, the timeline for completion will be 1 – 2 hours.
Course Objectives:
Upon completion of the course, participants should be able to:
- Explain how the issue of fire safety is addressed by occupational health and safety (OHS) legislation in Canada and identify the fire safety responsibilities of employers and those of workers
- Describe safe work practices that can reduce the risk of fire
- Know what to do in the event of a fire
- Recognize fire-related situations in which the use of a fire extinguisher is appropriate and situations in which it is best to evacuate rather than try to put out the fire
- Identify the types of extinguishers, and the classes of fire that can be put out using each type of extinguisher
- Know how to use a fire extinguisher
- Understand the maintenance and servicing requirements related to fire extinguishers
Evaluation Process:
Fire Safety is a 4-module course. At the end of each module, there is a test. Participants must successfully complete the test before continuing to the next module. Participants that do not achieve 100% can review the module content and try as many times as necessary to advance and complete the course. Test questions are randomly selected from a test bank, making each test unique. Upon successfully completing all modules, there is a printable certificate for your records.
How to register?
Please select how many you would like to purchase and pay for the course by adding to your cart. Once payment is received you will receive an email within 24hrs from the Red Cross with your login code(s). Please makes sure we receive email addresses for everyone enrolled into the program with first and last name. This will ensure everyone is getting login codes.
When successfully completed you will receive an electronic certificate of completion.
Bloodborne Pathogens
This program is designed for individuals who may be exposed to blood and body fluids or items contaminated with blood during the performance of their work. This program will give anyone a basic understanding of blood-borne pathogens.
Duration:
This online course is self-paced. Participants may leave the course at anytime and can resume where they left off. The duration will depend on the individual participant and their prior knowledge of the subject matter. On average, the course will take between 3 – 4 hours to complete..
Course Objectives:
The purpose of this course is to provide participants with the basic ability to recognize the hazards associated with occupational exposure to blood and body fluids; be familiar with the steps to prevent exposure to bloodborne pathogens; and to know the steps that should be taken following exposure to blood and body fluids.
The course is presented in 4 modules:
- Introduction to Bloodborne Pathogens
- Bloodborne Pathogen Regulations
- Workplace Programs and Personal Protection
- Bloodborne Pathogen Exposure Follow-up
How to register?
Please select how many you would like to purchase and pay for the course by adding to your cart. Once payment is received you will receive an email within 24hrs from the Red Cross with your login code(s). Please makes sure we receive email addresses for everyone enrolled into the program with first and last name. This will ensure everyone is getting login codes.
When successfully completed you will receive an electronic certificate of completion.